package org.apache.maven.scm.provider.jazz.command.checkin;
   
   /*
    * Licensed to the Apache Software Foundation (ASF) under one
    * or more contributor license agreements.  See the NOTICE file
    * distributed with this work for additional information
    * regarding copyright ownership.  The ASF licenses this file
    * to you under the Apache License, Version 2.0 (the
    * "License"); you may not use this file except in compliance
   * with the License.  You may obtain a copy of the License at
   *
   * http://www.apache.org/licenses/LICENSE-2.0
   *
   * Unless required by applicable law or agreed to in writing,
   * software distributed under the License is distributed on an
   * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
   * KIND, either express or implied.  See the License for the
   * specific language governing permissions and limitations
   * under the License.
   */
  
  import java.io.File;
  import java.util.List;
  
  import org.apache.maven.scm.ScmException;
  import org.apache.maven.scm.ScmFileSet;
  import org.apache.maven.scm.ScmVersion;
  import org.apache.maven.scm.command.add.AddScmResult;
  import org.apache.maven.scm.command.checkin.AbstractCheckInCommand;
  import org.apache.maven.scm.command.checkin.CheckInScmResult;
  import org.apache.maven.scm.provider.ScmProviderRepository;
  import org.apache.maven.scm.provider.jazz.command.JazzConstants;
  import org.apache.maven.scm.provider.jazz.command.JazzScmCommand;
  import org.apache.maven.scm.provider.jazz.command.add.JazzAddCommand;
  import org.apache.maven.scm.provider.jazz.command.consumer.DebugLoggerConsumer;
  import org.apache.maven.scm.provider.jazz.command.consumer.ErrorConsumer;
  import org.apache.maven.scm.provider.jazz.repository.JazzScmProviderRepository;
  import org.codehaus.plexus.util.StringUtils;
  import org.codehaus.plexus.util.cli.StreamConsumer;
  
  // The Maven SCM Plugin "checkin" goal is equivalent to the RTC "checkin" command.
  //
  // This implementation of the Maven SCM Plugin "checkin" goal creates a change set with the message provided.
  // It then uses the Jazz "scm "checkin" command to check the files into a remote workspace.
  // If there is a flow target defined and the pushChanges flag is true (the default), then the remote workspace
  // will be delivered ("scm deliver") to the flow target (a stream or other workspace).
  // 
  // Set the pushChanges flag to false, if you do not want the repository workspace delivered.
  //
  // NOTE: At this point, only a SINGLE flow target is supported. Jazz itself, allows for more than one.
  //
  // The differences between this and the "add" goal, are:
  //      - The add goal will only checkin into the remote repository workspace.
  //      - The add goal will never deliver.
  //      - The add goal does not create a change set.
  //
  // This is the best we can do to mimic the implementations of the other providers, that provide a working
  // "add" function (eg "svn add").
  //
  // Add may have had been able to use the "scm share" command, but that is recusive and only takes directory
  // names; we are not able to specify specific or single files.
  //
  // See the following links for additional information on the RTC "checkin" command.
  // RTC 2.0.0.2:
  // http://publib.boulder.ibm.com/infocenter/rtc/v2r0m0/topic/com.ibm.team.scm.doc/topics/r_scm_cli_checkin.html
  // RTC 3.0:
  // http://publib.boulder.ibm.com/infocenter/clmhelp/v3r0/topic/com.ibm.team.scm.doc/topics/r_scm_cli_checkin.html
  // RTC 3.0.1:
  // http://publib.boulder.ibm.com/infocenter/clmhelp/v3r0m1/topic/com.ibm.team.scm.doc/topics/r_scm_cli_checkin.html
  //
  // See the following links for additional information on the RTC "deliver" command.
  // RTC 2.0.0.2:
  // http://publib.boulder.ibm.com/infocenter/rtc/v2r0m0/topic/com.ibm.team.scm.doc/topics/r_scm_cli_deliver.html
  // RTC 3.0:
  // http://publib.boulder.ibm.com/infocenter/clmhelp/v3r0/topic/com.ibm.team.scm.doc/topics/r_scm_cli_deliver.html
  // RTC 3.0.1:
  // http://publib.boulder.ibm.com/infocenter/clmhelp/v3r0m1/topic/com.ibm.team.scm.doc/topics/r_scm_cli_deliver.html
  //
  
  /**
   * @author <a href="mailto:ChrisGWarp@gmail.com">Chris Graham</a>
   */
  public class JazzCheckInCommand
      extends AbstractCheckInCommand
  {
  
      /**
       * {@inheritDoc}
       */
      protected CheckInScmResult executeCheckInCommand( ScmProviderRepository repository, ScmFileSet fileSet,
                                                        String message, ScmVersion scmVersion )
          throws ScmException
      {
          if ( scmVersion != null && StringUtils.isNotEmpty( scmVersion.getName() ) )
          {
              throw new ScmException( "This provider command can't handle tags." );
          }
  
          if ( getLogger().isDebugEnabled() )
         {
             getLogger().debug( "Executing checkin command..." );
         }
 
         // Create a changeset. We need to do this, as otherwise the information contained in the message
         // will be lost forever.
         JazzScmCommand createChangesetCmd = createCreateChangesetCommand( repository, fileSet, message );
         DebugLoggerConsumer outputConsumer = new DebugLoggerConsumer( getLogger() );
         ErrorConsumer errConsumer = new ErrorConsumer( getLogger() );
 
         int status = createChangesetCmd.execute( outputConsumer, errConsumer );
         if ( status != 0 || errConsumer.hasBeenFed() )
         {
             return new CheckInScmResult( createChangesetCmd.getCommandString(),
                                          "Error code for Jazz SCM create changeset command - " + status,
                                          errConsumer.getOutput(), false );
         }
 
         // Now check in the files themselves.
         return executeCheckInCommand( repository, fileSet, scmVersion );
     }
 
     protected CheckInScmResult executeCheckInCommand( ScmProviderRepository repo, ScmFileSet fileSet,
                                                       ScmVersion scmVersion )
         throws ScmException
     {
         // Call the Add command to perform the checkin into the repository workspace.
         JazzAddCommand addCommand = new JazzAddCommand();
         addCommand.setLogger( getLogger() );
         AddScmResult addResult = addCommand.executeAddCommand( repo, fileSet );
 
         // Now, if it has a flow target, deliver it.
         JazzScmProviderRepository jazzRepo = (JazzScmProviderRepository) repo;
         if ( jazzRepo.isPushChangesAndHaveFlowTargets() )
         {
             // Push if we need too
             JazzScmCommand deliverCmd = createDeliverCommand( (JazzScmProviderRepository) repo, fileSet );
             StreamConsumer deliverConsumer =
                 new DebugLoggerConsumer( getLogger() );      // No need for a dedicated consumer for this
             ErrorConsumer errConsumer = new ErrorConsumer( getLogger() );
 
             int status = deliverCmd.execute( deliverConsumer, errConsumer );
             if ( status != 0 || errConsumer.hasBeenFed() )
             {
                 return new CheckInScmResult( deliverCmd.getCommandString(),
                                              "Error code for Jazz SCM deliver command - " + status,
                                              errConsumer.getOutput(), false );
             }
         }
 
         // Return what was added.
         return new CheckInScmResult( addResult.getCommandLine(), addResult.getAddedFiles() );
     }
 
     public JazzScmCommand createCreateChangesetCommand( ScmProviderRepository repo, ScmFileSet fileSet, String message )
     {
         JazzScmCommand command =
             new JazzScmCommand( JazzConstants.CMD_CREATE, JazzConstants.CMD_SUB_CHANGESET, repo, false, fileSet,
                                 getLogger() );
         command.addArgument( message );
 
         return command;
     }
 
     public JazzScmCommand createCheckInCommand( ScmProviderRepository repo, ScmFileSet fileSet )
     {
         JazzScmCommand command =
             new JazzScmCommand( JazzConstants.CMD_CHECKIN, null, repo, false, fileSet, getLogger() );
 
         // TODO, this was taken out to quickly test how the release plugin works.
         // The release plugin has the fileSet.getbaseDir() as the project it is checking in
         // This happens to be a folder under the sandbox root, and so the checkin would fail because it needs
         // to check in at the sandbox root level (not sub folders)
         // The SCM Plugin has a basedir parameter that you can pass it, so everythig works ok from the scm-plugin alone
         // but the release-plugin doesn't look like it lets you do that. (or I didn't have enough time
         // to figure out how to do it properly).
 
         // if (fileSet != null) {
         // command.addArgument(JazzConstants.LOAD_ROOT_DIRECTORY_ARG);
         // command.addArgument(fileSet.getBasedir().getAbsolutePath());
         // }
 
         List<File> files = fileSet.getFileList();
         if ( files != null && !files.isEmpty() )
         {
             for ( File file : files )
             {
                 command.addArgument( file.getPath() ); // Check in only the files specified
             }
         }
         else
         {
             command.addArgument( "." ); // This will check in all local changes
         }
 
         return command;
     }
 
     // Create the JazzScmCommand to execute the "scm deliver ..." command
     // This will deliver the changes to the flow target (stream or other workspace).
     public JazzScmCommand createDeliverCommand( JazzScmProviderRepository repo, ScmFileSet fileSet )
     {
         JazzScmCommand command = new JazzScmCommand( JazzConstants.CMD_DELIVER, repo, fileSet, getLogger() );
 
         if ( repo.getWorkspace() != null && !repo.getWorkspace().equals( "" ) )
         {
             command.addArgument( JazzConstants.ARG_DELIVER_SOURCE );
             command.addArgument( repo.getWorkspace() );
         }
 
         if ( repo.getFlowTarget() != null && !repo.getFlowTarget().equals( "" ) )
         {
             command.addArgument( JazzConstants.ARG_DELIVER_TARGET );
             command.addArgument( repo.getFlowTarget() );
         }
 
         // This command is needed so that the deliver operation will work.
         // Files that are not under source control (a--) [temp files etc]
         // will cause the deliver operation to fail with the error:
         // "Cannot deliver because there are one or more items that are not checked in.
         // Check in the changes or rerun with --overwrite-uncommitted."
         // However, from the maven perspective, we only need files that are
         // under source control to be delivered. Maven has already checked
         // for this (via the status command). 
         //
         // So we add this argument to allow the deliver to work.
         command.addArgument( JazzConstants.ARG_OVERWRITE_UNCOMMITTED );
 
         return command;
     }
 }