Built by Maven

Releasing

Introduction

The main aim of the maven-release plugin is to provide a standard mechanism to release project artifacts outside the immediate development team. The plugin provides basic functionality to create a release and to update the project's SCM accordingly.

To create a release the maven-release plugin is executed through maven in 2 stages:

  1. Preparing the release.
  2. Performing the release.

Preparing the release

The plugin will record release information into a new revision of the project's pom.xml file as well as applying SCM versioning to the project's resources.

The release:prepare goal will:

  1. Verify that there are no uncommitted changes in the workspace.
  2. Prompt the user for the desired tag, release and development version names.
  3. Modify and commit release information into the pom.xml file.
  4. Tag the entire project source tree with the new tag name.

The following example shows how to run the release:prepare goal with a Subversion SCM. The commandline example directs the plugin to locate a Subversion SCM on a local file system.

mvn release:prepare \
        -Dproject.scm.developerConnection=scm:svn:file:///D:/subversion_data/repos/my_repo/my-app-example/trunk \
        -DtagBase=file:///D:/subversion_data/repos/my_repo/my-app-example/tags

When using the release:prepare goal, the user must supply maven with information regarding the current location of the project's SCM. In the previous example maven was supplied with the current location of the development trunk and the new location to record tagged instances of the project.

  • project.scm.developerConnection

    The current location of the development trunk. A valid SCM URL format appropriate to the SCM provider. The "SCM:Provider:" prefix is used to determine the provider being used.

  • tagbase

    The new location to record a tagged release. A valid SCM URL format appropriate to the SCM provider without the "SCM:Provider:" prefix.

The previous goal parameters can be supplied while executing maven on the commandline, (as shown in the previous example) or they can be defined and maintained within the project's pom.xml file. The location of the current development trunk is defined within the pom.xml file in the following form:

<project>
  <modelVersion>4.0.0</modelVersion>
  <groupId>com.mycompany.app</groupId>
  <artifactId>app</artifactId>
  <packaging>jar</packaging>
  <version>1.0-SNAPSHOT</version>
  <name>Application</name>
  <url>http://app.mycompany.com</url>
  ...
  <scm>
    <developerConnection>scm:svn:file:///D:/subversion_data/repos/my_repo/my-app-example/trunk</developerConnection>
  </scm>
  ...
  <build>
    <plugins>
      ...
      <plugin>
        <artifactId>maven-release-plugin</artifactId>
        <version>2.5.2</version>
        <configuration>
          ...
          <tagBase>
            file:///D:/subversion_data/repos/my_repo/my-app-example/tags
          </tagBase>
          ...
        </configuration>
      </plugin>
      ...
    </plugins>
  </build>
  ...
</project>

To define the tagBase parameter within the pom.xml file a tagBase element must be defined within a plugins/plugin/configuration element. The following example shows how this would look within the pom.xml file.

<project>
  <modelVersion>4.0.0</modelVersion>
  <groupId>com.mycompany.app</groupId>
  <artifactId>app</artifactId>
  <packaging>jar</packaging>
  <version>1.0-SNAPSHOT</version>
  <name>Application</name>
  <url>http://app.mycompany.com</url>
  ...
  <scm>
    <developerConnection>scm:svn:file:///D:/subversion_data/repos/my_repo/my-app-example/trunk</developerConnection>
  </scm>
  ...
  <build>
    <plugins>
      ...
      <plugin>
        <artifactId>maven-release-plugin</artifactId>
        <version>2.5.2</version>
        <configuration>
          ...
          <tagBase>
            file:///D:/subversion_data/repos/my_repo/my-app-example/tags
          </tagBase>
          ...
        </configuration>
      </plugin>
      ...
    </plugins>
  </build>
  ...
</project>

During the execution of the release:prepare goal maven will interact with the user to gather information about the current release. Maven will prompt the user for the following information:

  • A Desired SCM provider tag name.

    This is a SCM provider specific value, in the case of the Subversion SCM provider this value is equal to the directory name that will appear under the URL provided by the the tagBase parameter.

  • A Desired project release version.

    This value is placed in the pom.xml that will define the current release. If a development pom.xml holds a version value of 1.0-SNAPSHOT then the release version would be 1.0. This is not enforced and can be a value appropriate to yourself or a company environment.

  • A New development version.

    This value is the placed in the next revision of the pom.xml file used for continuing development. If the current release represented version 1.0 then an appropriate value could be 2.0-SNAPSHOT. The SNAPSHOT designator is required to prepare and perform future releases. This value is then committed in the next development revision of the pom.xml file.

After maven has been supplied with the required information the maven-release plugin will interact with the project's SCM and define a relese to be extracted and deployed. At the same time the project's development trunk is updated allowing developers to continue with further modifications that will be included within future releases.

Performing the release

The plugin will extract file revisions associated with the current release. Maven will compile, test and package the versioned project source code into an artifact. The final deliverable will then be released into an appropriate maven repository.

The release:perform goal will:

  1. Extract file revisions versioned under the new tag name.
  2. Execute the maven build lifecycle on the extracted instance of the project.
  3. Deploy the versioned artifacts to appropriate local and remote repositories.

The following example shows how to run the release:perform goal from the commandline.

mvn release:perform

The release:perform goal requires a file called release.properties to be present within the project root directory. The release.properties file is constructed during the execution of the release:prepare goal and contains all the information needed to locate and extract the correctly tagged version of the project. Shown below is an example of the contents that can appear within an instance of the release.properties file.

Note: The location of the release.properties file is under review and could be moved to the target directory.

#Generated by Release Plugin on: Sat Nov 12 11:22:33 GMT 2005
#Sat Nov 12 11:22:33 GMT 2005
maven.username=myusername
checkpoint.transformed-pom-for-release=OK
scm.tag=1.0
scm.url=scm\:svn\:file\:///D\:/subversion_data/repos/my_repo/my-app-example/trunk
scm.tag-base=file\:///D\:/subversion_data/repos/my_repo/my-app-example/tags
checkpoint.transform-pom-for-development=OK
checkpoint.local-modifications-checked=OK
checkpoint.initialized=OK
checkpoint.checked-in-release-version=OK
checkpoint.tagged-release=OK
checkpoint.prepared-release=OK
checkpoint.check-in-development-version=OK

The release.properties file is created while preparing the release. After performing the release the file remains within the project root directory until the maven user deletes it. The release.properties file can be given to any developer within the team and by simply excuting the release:perform goal can create and deploy a new instance of the project artifact time and again.

During the execution of the release:perform goal the entire maven build lifecycle is executed on the project. The tagged project source code is extracted, compiled, tested, documented and deployed. An instance of the release artifact is deployed to the machine's local repository. An another instance of the release can be deployed to a remote repository by configuring the distributionManagement element within the pom.xml file.

The following is an example of how a distributionManagement element can be configured within a project pom.xml file.

<project>
  <modelVersion>4.0.0</modelVersion>
  <groupId>com.mycompany.app</groupId>
  <artifactId>app</artifactId>
  <packaging>jar</packaging>
  <version>1.0-SNAPSHOT</version>
  <name>Application</name>
  <url>http://app.mycompany.com</url>
  ...
  <distributionManagement>
    <repository>
      <id>myRepoId</id>
      <name>myCompanyReporsitory</name>
      <url>ftp://repository.mycompany.com/repository</url>
    </repository>
  </distributionManagement>
  ...
</project>

If the distributionManagement element is not configured within the pom.xml file then the deployment of the artifact will fail. Maven will report a failure back to the user for the execution of the maven-deploy plugin. Please refer maven documentationa and additional mini guides for the use of the maven-deploy plugin.

The following delvierables are created and deployed to local and remoted repositories after the execution of the release:perform goal has finished.

  • artifact id-version.jar

    The binaries for the current release of the project.

  • artifact id-version-javadoc.jar

    The javadoc explaining the current functionality of the classes within the current release.

  • artifact id-version-source.jar

    The source code revisions used to build the current release of the project.

  • artifact id-version.pom

    The contents of the pom.xml file used to create the current release of the project.

Troubleshooting

I get a "The authenticity of host 'host' can't be established." error and the build hangs

This is because your ~user/.ssh/known_hosts file doesn't have the host listed. You'd normally get a prompt to add the host to the known host list but Maven doesn't propagate that prompt. The solution is to add the host the known_hosts file before executing Maven. On Windows, this can be done by installing an OpenSSH client (for example SSHWindows), running ssh <host> and accepting to add the host.

The site deploy goal hangs

First, this means that you have successfully deployed the artifacts to the remote repo and that it's only the site deployment that is now an issue. Stop your build, cd to target/checkout> and run the build again by executing mvn site:deploy. You should see a prompt asking you to enter a password. This happens if your key is not in the authorized keys on the server.